Cadet SOFTHEAT EBHN500 User Manual download pdf

OWNER’S GUIDE

MODELS:

EBHN500

EBHN750

EBHN1000

EBHN1250

EBHN1500

EBHN500-8

EBHN750-8

EBHN1000-8

EBHN1250-8

EBHN1500-8

TOOLS REQUIRED

•

Phillips Screwdriver

•

Straight Screwdriver

•

Wire Strippers

•

Drill or Hammer

•

Level

•

Punch or Chisel

•

Drill Bits

•

Utility Knife

•

(4) Wood Screws

•

(3) Wire Nuts

•

(1) Strain Relief Connector

IMPORTANT

INSTRUCTIONS

SAVE

THESE

INSTRUCTIONS

WARNING!

Turn the electrical power off at the electrical panel

board (circuit breaker or fuse box) and lock or tag the

panel board door to prevent someone from turning

on power while you are working on the heater.

Failure to do so could result in serious electrical

shock, burns, or possible death.

When using electrical appliances, basic precautions should

always be followed to reduce the risk of fire, electric shock, and

injury to persons, including the following:

1. Read all instructions and labels before installing this heater.

2. WARNING

A heater has hot and arcing parts inside. Do not install in

areas where gasoline, paint or flammable liquids are stored or

excessive lint or dust are present.

3. WARNING

This heater is hot when in use. To avoid burns, do not let bare skin

touch hot surfaces. Keep combustible materials, such as furniture,

pillows, bedding, papers, clothes and curtains away from heater.

4. To prevent possible fire, do not block air intakes or exhaust in

any manner. Do not use on soft surfaces, like a bed, where

openings may become blocked. Heaters must be kept clean of

excessive lint, dirt and debris. (See Maintenance Instructions).

5. Risk of electrical shock. Do not insert or allow foreign objects to

enter any ventilation or exhaust opening as this may cause an

electric shock or fire, or damage the heater.

6. Do not place heater below an electrical convenience receptacle.

7. WARNING

Overheating or fire may occur. Do not install the heater behind

doors.

8. Use extreme caution when any heater is used near children or

invalids and whenever the heater is left operating unattended.

9. WARNING

Do not operate after heater malfunctions or has been dropped

or damaged in any manner.

10. WARNING

Risk of fire. Do not block heater minimum of 12 inches in front

and above, 6 inches on both sides.

11.Use this heater only as described in this manual. Any other use

not recommended by the manufacturer may cause fire, electrical

shock, or injury to persons.

12.Verify that the electrical supply wires are the same voltage as

the heater. The heater must be grounded to the grounding

screw provided. If you need to install a new circuit or need

additional wiring information, consult a qualified electrician.

Tel:

360-693-2505

www.cadetco.com

P.O.

Box

1675

Vancouver,

98668-1675

Features & Benefits

•

Whisper quiet operation and low surface temperatures

•

Filled with non-toxic, non-hazardous thermal fluid

•

Self-contained hermetically sealed element design requires no

plumbing, piping, or other water supply

•

Thermal fluid capacity offers better heat retention, which creates

less cycling and keeps more consistent room temperatures

•

Designed to reduce the effects of indoor allergens

•

7-year element warranty

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - OWNER’S GUIDE

OWNER’S GUIDEMODELS: EBHN500 EBHN750EBHN1000 EBHN1250 EBHN1500 EBHN500-8 EBHN750-8 EBHN1000-8EBHN1250-8EBHN1500-8TOOLS REQUIRED•Phillips Screwdriver•S

Page 2 - INSTALLATION INSTRUCTIONS

CONSULTE LOS CÓDIGOS ELÉCTRICOS LOCALES PARA DETERMINAR QUÉ TRABAJOS DEBEN SER REALIZADOS POR PERSONAL DE SERVICIO ELÉCTRICO CALIFICADORuido de borbot

Page 3

THERMOSTATA thermostat is required. A Cadet wall thermostat is recommendedfor optimum performance, or you may prefer the convenience of a built-in EBK

Page 4 - STEP 4: Reassemble

INSTALLATION INSTRUCTIONSREAD ALL INSTRUCTIONS AND SAFETY INFORMATION.CAUTION - HighTemperature, KeepElectrical Cords,Drapes, And OtherFurnishings Awa

Page 5 - WARRANTIES

INSTALLATION INSTRUCTIONSInside a Softheat baseboard a hermetically sealed heat transfer fluid isheated by an electric heating element. As the soluti

Page 6 - GUÍA PARA EL PROPIETARIO

CONSULT LOCAL ELECTRICAL CODES TO DETERMINE WHAT WORK MUST BE PERFORMED BY QUALIFIED ELECTRICAL SERVICE PERSONNELGurgling noiseHeater notworkingLiquid

Page 7 - TERMOSTATO

GUÍA PARA EL PROPIETARIOMODELOS: EBHN500 EBHN750EBHN1000 EBHN1250 EBHN1500EBHN500-8 EBHN750-8 EBHN1000-8EBHN1250-8EBHN1500-8HERRAMIENTAS NECESARIAS:•D

Page 8 - Ubicación del

TERMOSTATOSe requiere un termostato. Se recomienda un termostato mural Cadetpara un óptimo rendimiento, o bien puede optar por la comodidad deun juego

Page 9 - Aire caliente

ZONA DE PERFOR. SEGURA – ARRIBAZONA DE PERFOR. SEGURA – ABAJOINSTRUCCIONES PARA LA INSTALACIÓN8. Tras confirmar que el calentador está nivelado,fije e

Page 10 - GARANTÍA

INSTRUCCIONES PARA LA INSTALACIÓNUn elemento termoeléctrico calienta el fluido térmico que se encuentra herméticamente sellado en el interior del zóca

Comments to this Manuals

No comments

Cadet SOFTHEAT EBHN500 User Manual

Browse online or download User Manual for Radiators Cadet SOFTHEAT EBHN500. Cadet SOFTHEAT EBHN500 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Radiators Cadet SOFTHEAT EBHN500