Cadet SMART-BASE SBFT2 User Manual download pdf (Page 5)

General Programming Operation:

5-1-1 programming allows you to create a heating schedule that is specific to

your needs: weekdays, Saturday, and Sunday. Weekdays are a single unit,

meaning the program schedule will be the same for Monday, Tuesday,

Wednesday, Thursday, and Friday. Saturday and Sunday can each have

individual programs. Every weekday, Saturday, or Sunday program has 4 daily

settings: WAKE, LEAVE, RETURN, and SLEEP.

✦ WAKE: The desired room temperature and time the heating period should

begin when you are present in the morning. If desired, allow 15 minutes

prior to wake time for the room to reach comfort level.

✦ LEAVE: The time and the lower desired temperature you would like your

room to be when you leave for the day. This is an energy saving period.

✦ RETURN: The desired room temperature and time the heating period

should begin when you are present in the evening. If desired, allow 15

minutes prior to your return time for the room to reach comfort level.

✦ SLEEP: The time and the lower desired temperature you would like your

room to be while you sleep. This is an energy saving period.

Each setting needs to be programmed with a time and temperature.

Programming begins by directing you to set the time of day for the 4 daily

settings for weekdays, Saturday, and Sunday. Once all times have been set, the

program will direct you to set the temperatures for the 4 daily settings for

weekdays, Saturday, and Sunday.

Operation Modes:

✦ The AUTOmatic mode runs the programmed sequence recorded by the

user. Use this mode when daily comfort needs and routine are in

accordance with the recorded program.

✦ The MANUAL mode overrides the recorded program sequence. Use this

mode when out of town or when maintaining a certain temperature set

point for an extended period of time is desired. Setting the manual

temperature to a cool set point of 62 degrees or less helps reduce ener-

gy costs. The MANUAL mode stays active until the AUTOmatic program

is activated.

✦ The Temporary Setpoint overrides the programmed temperature when

AUTO mode is activated. Set a Temporary Setpoint when changing the

temperature for a given period of the day. The setpoint will stay active until

the next programmed period for the given day.

Energy Saving Tips:

Here are a few tips to maximize energy saving capabilities:

✦ When programming, always set the temperature back for a minimum of 8

hours when away from home or asleep.

✦ Each 2-degree decrease for an 8 hour period is equivalent to a 2% savings.

✦ Maximize the 8 hour temperature set back by reducing the setpoint 8 to

10 degrees from your preferred comfort setpoint.

✦ Use the manual mode to set and hold the temperature back 8 degrees or

more while on vacation.

✦ Or, maintain default program. The thermostat comes equipped with

an energy saving program, as outlined in the “Default Settings” table.

1. To activate the PROGRAM MODE,

press the MODE button. CLOCK,

NEXT, SCHED appear on the display.

3. To set the hours, press the down

▼

button to decrease the hour or the

▲

button to advance. Note: the

clock is a 24 hour clock and will display

AM or PM to distinguish time of day.

The AM/PM icon will change with

setting the hours.

5. Press the MODE button to activate

the set day of week mode. The SU icon

will flash. To set the day, press the

down

▼

button to select the previous

day or the up

▲

button to select the

next day. Only the selected day will

show on the LCD. Press the MODE

button to save your selection.

2. To activate the CLOCK MODE,

press the DOWN

▼

button. The hour

numerals will flash.

4. Press the MODE button to activate

the set minutes mode. The minute

numerals will flash. To set the minutes,

press the down

▼

button to decrease the

minutes or the up

▲

button to advance.

PROGRAMMING THE

AUTO SCHEDULE

1.To activate the PROGRAM MODE,

press the MODE button once. CLOCK,

NEXT, SCHED appear on the display.

3. To program the WAKE time setting,

press the down

▼

button to decrease

the time or the up

▲

button to increase.

When the time setting is correct, press

the MODE button to advance to

program the LEAVE time setting.

5. To program the RETURN time

setting, press the down

▼

button to

decrease the time or the up

▲

button

to increase. When the time setting is

correct, press the MODE button to

program the SLEEP time setting.

7. To program the WAKE, LEAVE,

RETURN and SLEEP time settings for

both Saturday (SA) and Sunday (SU),

return to the beginning of the

PROGRAMMING AUTO SCHEDULE

instructions and repeat.

2. To activate the AUTO SCHEDULE

program mode, press the up

▲

button

once. The first display will be the WAKE

time for Monday through Friday. Time

adjustments are made in 15 minute

increments.

4. To program the LEAVE time setting,

press the down

▼

button to decrease

the time or the up

▲

button to increase.

When the time setting is correct, press

the MODE button to advance to

program the RETURN time setting.

6. To program the SLEEP time setting,

press the down

▼

button to decrease

the time or the up

▲

button to increase.

When the time setting is correct, press

the MODE button to program the

Saturday WAKE time setting.

8. After programming the Saturday and

Sunday time settings, press the MODE

button to program the Monday through

Friday WAKE setpoint temperature. To

program setpoint temps, press the

down

▼

button to decrease the temp

or the up

▲

button to increase. When

the temperature setting is correct,

press the MODE button to advance to

program the LEAVE temp.

9. Continue to program the setpoint

temperatures by pressing the MODE

button to advance to LEAVE, RETURN

and then SLEEP. For each schedule,

press either the down

▼

button or the up

▲

button to program the correct setpoint.

Press the MODE button to advance.

AUTO and MANUAL Modes:

Selecting AUTO or MANUAL

MODE:

1. To select the AUTO or MANUAL

operating mode, press the MODE button

twice. The MANUAL, RUN, AUTO

appear on the display. The current mode

is identified by a flashing underline. Press

the down

▼

button to select MANUAL

mode or the up

▲

button to select AUTO

mode. To activate the selected operating

mode, press the MODE button again.

Setting a Temporary Setpoint:

3. To set a temporary setpoint

(AUTO mode only), press either the

down

▼

button or the up

▲

button to

display the current setpoint. To change

the setpoint, press the down

▼

button to

decrease the setting or press the up

▲

button to increase. TEMP is displayed to

indicate that a temporary setpoint is

active. The temporary setpoint will be

canceled when the next programmed

operating setting has been activated

(WAKE, LEAVE, RETURN or SLEEP). It

may also be canceled by adjusting the

setpoint up or down until the TEMP icon

disappears.

Before you program your thermostat, take a moment and write a program suitable

to your needs and schedule. You will need to know this before programming the

thermostat. Use the default settings guide above as a guideline.

Programming Instructions:

START UP

How To Press Buttons For Programming:

✦ To change the temperature set point, press the down

▼

or up

▲

button and hold,

release when desired set point is reached. Temperature increases or decreases

in 1 degree increments.

✦ To change the time of day, press the down

▼

or up

▲

button and hold, release

when desired set point is reached. Time of day increases or decreases in 15 minute

increments.

✦ For all other functions, press once to make changes or selections.

Setting the Time of Day and Day of Week:

10. Continue to program the setpoint

temperatures for Saturday and Sunday

by pressing the MODE button to

advance. For each schedule, press

either the down

▼

button or the up

▲

button to program the correct setpoint.

When you have completed the

programming, press the MODE button

to save.

Adjusting MANUAL Setpoint:

2. To adjust the MANUAL mode setpoint,

press either the down

▼

button or the up

▲

button to display the current manual

setpoint. To change the setpoint, press

the down

▼

button to decrease the

setting or press the up

▲

button to

increase. The thermostat will

automatically return to the time/room

temperature display within 30 seconds.

* The SMART-BASE thermostat has been simulated to offer the best performance

for a built-in control. The concept is to simulate a midpoint temperature of the room,

respond to this setting, and maintain it for optimum comfort. However, keep in mind

that temperature variances to this reading could be affected by drafts within the wall

area, cold air from flooring or drafts from a nearby window or door.

The default schedule only applies at the

first start of the microprocessor. When

the thermostat has been programmed,

the default values no longer apply.

Programmed values are retained if the

heater power is interrupted or turned OFF.

Once the power is restored, the thermostat

will be in AUTO mode. However, the clock and

day of the week will require reprogramming.

The thermostat will load its default

program settings when power is

established for the first time. The display

will alternate between a room temperature

display and a time of day display. Both the

time of day and room temperature

displays will continuously flash to indicate

that a power interruption has occured.

* Room

Temperature

Time of Day

1 2 3 4 5 6

Comments to this Manuals

No comments

Cadet SMART-BASE SBFT2 User Manual Page 5

Comments to this Manuals

Related products and manuals for Space heaters Cadet SMART-BASE SBFT2